Dinan Carbon Fiber Cold Air Intake for BMW 335i xDrive (E90) (Dinan Part No. D760-0030)


Special Note: Dinan Performance Software is highly recommended. Not compatible with M aerodynamic bumper.

As boost is increased through the use of performance software, the single factory intake becomes restrictive and the engine is lacking the air it needs to make maximum power. Our cold air intake force feeds the 3 liter turbocharged inline 6 with greater volumes of cool, oxygen rich air for substantial power gains by utilizing our secondary carbon fiber intake. The system is so effective that the carbon fiber inlet air temperature is a full 40 degrees Fahrenheit cooler than the incoming air from the stock inlet. Due to the increased airflow from our intake, the power-curve is extended into the higher RPM’s for a noticeable change. The system is a direct replacement for the factory air box lid, employing a hand-crafted carbon fiber unit that also includes a secondary carbon fiber intake tube that captures cool air from the lower grill and includes the shielding for the conical filter to insulate it from power robbing engine compartment heat.

Horsepower is increased by +14 Hp @ 6000 rpm and Torque is increased by +16ft-lbs @ 3400 rpm with Dinan Stage 3 Software, DINAN Intercooler and Free Flow Exhaust.

Stage 2 software, Free Flow Exhaust produces 12 Hp and 13 ft-lb torque

Stage 1 software, Free Flow Exhaust produces 9 Hp and 10 ft-lb torque

Completely Stock car produces 5 Hp and 6 ft-lb torque

Dinan Performance Software is highly recommended.

Additional information

Weight11 lbs
Dimensions29 × 17 × 7 in
Installation Hours


Emission Status

This product is in compliance with U.S. EPA Memorandum 1A, or this product has not been found, nor is believed to be, unlawful for use under the provisions of the Clean Air Act. Currently: This product is legal in California only for racing vehicles , which may never be used upon the highway.

Max Torque Gain

16 ft-lbs @ 3400 rpm*

Peak Horsepower

14 hp @ 6000 rpm*

Included Notes

Carbon fiber lid, Carbon Fiber air intake tube, rubber hose coupler, Panel air filter for the airbox, Conical air filter for the secondary intake, shielding for the conical filter, Mounting brackets & hardware.


There are no reviews yet.

Be the first to review “Dinan Carbon Fiber Cold Air Intake for BMW 335i xDrive (E90) (Dinan Part No. D760-0030)”

Your email address will not be published. Required fields are marked *

2007 - 2008BMW335xi (E90)3.0L L6